Log Console (Filter) - Allied Telesis IE340 Series Command Reference Manual

L C
OGGING OMMANDS
( )
LOG CONSOLE FILTER

log console (filter)

Overview This command creates a filter to select messages to be sent to all consoles when
the log console command is given. Selection can be based on the priority/severity
of the message, the program that generated the message, the logging facility
used, a sub-string within the message or a combination of some or all of these.
log console [level <level>] [program <program-name>] [facility
Syntax
<facility>] [msgtext <text-string>]
no log console [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
Parameter Description
level
Filter messages by severity level.
<level>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Filter messages by program. Include messages from a specified program.
<program-
The name of a program to log messages from. You can enter either one of the following
name>
predefined program names (depending on your device model), or another program name
that you find in the log output. The pre-defined names are not case sensitive but other
program names from the log output are.
rip
ripng
ospf
ospfv3
bgp
rsvp
pim-dm
pim-sm
pim-smv6
C613-50631-01 Rev A
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Routing Information Protocol (RIP)
Routing Information Protocol - next generation (RIPng)
Open Shortest Path First (OSPF)
Open Shortest Path First (OSPF) version 3 (OSPFv3)
Border Gateway Protocol (BGP)
Resource Reservation Protocol (RSVP)
Protocol Independent Multicast - Dense Mode (PIM-DM)
Protocol Independent Multicast - Sparse Mode (PIM-SM)
PIM-SM version 6 (PIM-SMv6)
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
427