Clear Port-Security Intrusion - Allied Telesis IE340 Series Command Reference Manual

S C
WITCHING OMMANDS
-
CLEAR PORT SECURITY INTRUSION

clear port-security intrusion

Overview Use this command to clear the history of the port-security intrusion list on all ports,
or an individual port. If you do not specify a port, this command clears the intrusion
lists of all ports.
This command does not clear any MAC addresses the switch has already learned.
If you want to clear already-learned MAC addresses from the filtering database, use
the
static
clear port-security intrusion [interface <port>]
Syntax
Mode Privileged Exec
Examples To see the intrusion list on port1.0.2, use the following command:
awplus#
Table 15-1: Example output from show port-security intrusion
To clear the history of port-security intrusion list on port1.0.2, use the following
command:
awplus#
To see the port-security status on port1.0.2, use the following command:
awplus#
C613-50631-01 Rev A
clear mac address-table dynamic
command.
Parameter Description
<port>
Specify the switch port from which the history of violated address
entries will be cleared, e.g. port1.0.4.
show port-security intrusion interface port1.0.2

awplus#show port-security intrusion interface port1.0.2
Port Security Intrusion List
------------------------------------------------------------
Interface: port1.0.2
801f.0200.19da
clear port-security intrusion interface port1.0.2
show port-security interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command or the
- 1 intrusion(s) detected
clear mac address-table
569