Ip Irdp Lifetime - Allied Telesis IE340 Series Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

IP IRDP LIFETIME

ip irdp lifetime
Overview This command sets the maximum length of time that hosts should consider the
Router Discovery advertised addresses as valid router addresses. If you change the
lifetime value, also change the maxadvertisementinterval and the
minadvertisementinterval to maintain the following ratios:
This command is synonymous with the ip irdp hostname<0-9000> command.
The no variant of this command sets the lifetime back to the default of 1800
seconds.
ip irdp lifetime <0-9000>
Syntax
no ip irdp lifetime
Default The lifetime value is 1800 seconds.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
To set the lifetime value to 4000 seconds for addresses advertised on vlan6, use
Examples
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the lifetime value to the default of 1800 seconds for addresses advertised on
vlan6, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip irdp
commands
ip irdp maxadvertinterval
ip irdp minadvertinterval
show ip irdp interface
C613-50631-01 Rev A
C
OMMANDS
Parameter Description
<0-9000>
Lifetime value in seconds of the advertised addresses.
configure terminal
interface vlan6
configure terminal
interface vlan6
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ip irdp lifetime 4000
no ip irdp lifetime
890