Ip Dns Forwarding Dead-Time - Allied Telesis IE340 Series Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE
-
IP DNS FORWARDING DEAD TIME

ip dns forwarding dead-time

Overview Use this command to set the time period in seconds when the device stops
sending any DNS requests to an unresponsive server and all retries set using
forwarding retry
device stops sending DNS requests at the DNS forwarding dead-time configured
and when all of the retries are used.
Use the no variant of this command to restore the default DNS forwarding
dead-time value of 3600 seconds.
ip dns forwarding dead-time <60-43200>
Syntax
no ip dns forwarding retry
Default The default time to stop sending DNS requests to an unresponsive server is 3600
seconds.
Mode Global Configuration
Usage notes See the
Examples To set the DNS forwarding retry count to 50 and to set the DNS forwarding
dead-time to 1800 seconds, use the commands:
awplus#
awplus(config)#
awplus(config)#
To reset the DNS retry count to the default of 2 and the DNS forwarding dead-time
to the default of 3600, use the commands:
awplus#
awplus(config)#
awplus(config)#
Related debug ip dns forwarding
commands
ip dns forwarding
ip dns forwarding retry
show ip dns forwarding
show ip dns forwarding server
C613-50631-01 Rev A
OMMANDS
are used. This time period is the DNS forwarding dead-time. The
Parameter Description
<60-43200>
Set the DNS forwarding dead-time in seconds. At the dead-time set,
the switch stops sending DNS requests to an unresponsive server.
ip dns forwarding retry
configure terminal
ip dns forwarding dead-time 1800
ip dns forwarding retry 50
configure terminal
no ip dns forwarding dead-time
no ip dns forwarding retry
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command used with this command.
ip dns
933