IP A
P
DDRESSING AND
ROTOCOL
-
IP ICMP ERROR
INTERVAL
ip icmp error-interval
Overview
Use this command to limit how often IPv4 ICMP error messages are sent. The
maximum frequency of messages is specified in milliseconds.
Use the no variant of this command to reset the frequency to the default.
Syntax
ip icmp error-interval <interval>
no ip icmp error-interval
Default
1000
Mode
Global Configuration
Example
To configure the rate to be at most one packet every 10 seconds, use the
commands:
awplus#
awplus(config)#
To reset the rate to the default of one packet every second, use the commands:
awplus#
awplus(config)#
Related
ipv6 icmp error-interval
commands
C613-50631-01 Rev A
C
OMMANDS
Parameter
Description
<interval>
0-2147483647, interval in milliseconds.
configure terminal
ip icmp error-interval 10000
configure terminal
no ip icmp error-interval
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
885