Show Ip Protocols Rip - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS

SHOW IP PROTOCOLS RIP

show ip protocols rip
Overview Use this command to display RIP process parameters and statistics.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and
Syntax show ip protocols rip
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 26-1: Example output from the show ip protocols rip command
C613-50631-01 Rev A
show ip protocols rip
Routing Protocol is "rip" 
Sending updates every 30 seconds with +/-50%, next due in 12 
seconds 
Timeout after 180 seconds, garbage collect after 120 seconds 
Outgoing update filter list for all interface is not set 
Incoming update filter list for all interface is not set 
Default redistribution metric is 1 
Redistributing: connected static 
Default version control: send version 2, receive version 2 
Interface Send
vlan25
Routing for Networks: 
10.10.0.0/24 
Routing Information Sources: 
Gateway
Distance: (default is 120
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Configuration_Guide.
Key-chain 
Recv
2 
2
BadPackets BadRoutes
"Getting_Started
Distance Last Update 
1066