Allied Telesis IE340 Series Command Reference Manual page 958

IP 6 C
V OMMANDS
6
IPV ADDRESS AUTOCONFIG
To disable SLAAC on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 address
commands
ipv6 enable
show ipv6 interface
show running-config
C613-50631-01 Rev A
configure terminal
interface vlan2
no ipv6 address autoconfig
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
958