OSPF C
OMMANDS
SHOW IP OSPF DATABASE ROUTER
show ip ospf database router
Overview
Use this command to display information only about the router LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ip ospf database router [<adv-router-id>
self-originate|<adv-router-id>]
Mode
User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
Output
Figure 28-13: Example output from the show ip ospf database router command
C613-50631-01 Rev A
Parameter
adv-router
self-originate
<adv-router- id>
show ip ospf database router 1.2.3.4 self-originate
show ip ospf database router self-originate
show ip ospf database router 1.2.3.4 adv-router 2.3.4.5
OSPF Router process 100 with ID (10.10.11.50)
Router Link States (Area 0.0.0.0)
LS age: 878
Options: 0x2 (*|-|-|-|-|-|E|-)
Flags: 0x3 : ABR ASBR
LS Type: router-LSA
Link State ID: 10.10.11.50
Advertising Router: 10.10.11.50
LS Seq Number: 80000004
Checksum: 0xe39e
Length: 36
Number of Links: 1
Link connected to: Stub Network
(Link ID) Network/subnet number: 10.10.10.0
(Link Data) Network Mask: 255.255.255.0
Number of TOS metrics: 0
TOS 0 Metric: 10
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Displays all the LSAs of the specified router.
Displays self-originated link states.
The router ID of the advertising router, in IPv4 address format.
Note however, that this no longer represents a real address.
"Getting Started
Guide.
1189