Ip Ospf Authentication - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS

IP OSPF AUTHENTICATION

ip ospf authentication
Overview This command sets the authentication method used when sending and receiving
OSPF packets on the current interface. The default is to use no authentication. If no
authentication method is specified in this command, then plain text
authentication will be used.
The no variant of this command disables the authentication.
ip ospf [<ip-address>] authentication [message-digest|null]
Syntax
no ip ospf [<ip-address>] authentication
Mode Interface Configuration for a VLAN interface.
Usage notes Use the
Use the
Example To configure VLAN interface vlan2 to have no authentication, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
This will override any text or MD5 authentication configured on this interface.
Related ip ospf authentication-key
commands
area authentication
ip ospf message-digest-key
C613-50631-01 Rev A
Parameter
<ip-address>
message-digest
null
ip ospf authentication-key
ip ospf message-digest-key
configure terminal
interface vlan2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The IP address of the interface.
Use the message digest authentication.
Use no authentication. This overrides the password or
message digest authentication of the interface.
command to specify a simple text password.
command to specify an MD5 key.
ip ospf authentication null
1139