Show Debugging Udld - Allied Telesis IE340 Series Command Reference Manual

U L D
NIDIRECTIONAL INK ETECTION

SHOW DEBUGGING UDLD

show debugging udld
Overview Use this command to show which UDLD debugging options are set.
show debugging udld
Syntax
Mode Privileged Exec
Example To show which UDLD debugging options are set, use the command:
awplus#
Output Figure 18-1: Example output from show debugging udld
Related debug udld
commands
C613-50631-01 Rev A
(UDLD) C
OMMANDS
show debugging udld
awplus# show debugging udld
UDLD debugging status:
Info debugging : off
Packet debugging: off
State debugging : on
NSM debugging : off
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
771