Distribute-List (Ospf) - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS
- (OSPF)
DISTRIBUTE LIST

distribute-list (OSPF)

Overview Use this command to apply filtering to the transfer of routing information between
OSPF and the IP route table. You can apply filtering in either direction, from OSPF
to the IP route table using an in distribute-list or from the IP route table to OSPF
using an out distribute-list.
The effect of an in filter is that some route information that OSPF has learned from
LSA updates will not be installed into the IP route table. The effect of an out filter
is that some route information that could be redistributed to OSPF will not be
redistributed to OSPF. See the Usage section below for the distinction between
the in and out distribute-lists.
The entities that are used to perform filtering are ACLs or route-maps, which match
on certain attributes in the routes that are being transferred.
For information about ACLs and route maps, see the
Configuration Guide
Guide.
The no variant of this command removes the configured distribute-list command
entry.
Syntax distribute-list {<access-list-name>|route-map
<route-map-name>} in
distribute-list <access-list-name> out
{bgp|connected|rip|static}
no distribute-list <access-list-name> in
no distribute-list <access-list-name> out
{bgp|connected|rip|static}
Mode Router Configuration
C613-50631-01 Rev A
and the
Parameter
<access-list-name>
in
out
<route-map-name>
bgp
connected
rip
static
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Routemaps Feature Overview and Configuration
Description
Specifies the name of the access list. The access list defines
which networks are received and which are suppressed.
Indicates that this applies to incoming advertised routes.
Indicates that this applies to outgoing advertised routes.
The name of the route-map that the distribute-list applies.
This defines which networks are installed in the IP route
table and which networks are filtered from the IP route
table.
Specify the redistribution of BGP routes.
Specify the redistribution of connected routes.
Specify the redistribution of RIP routes.
Specify the redistribution of static routes.
ACL Feature Overview and
1134