Ecofriendly Led - Allied Telesis IE340 Series Command Reference Manual

S C M
YSTEM ONFIGURATION AND

ECOFRIENDLY LED

ecofriendly led
Overview Use this command to enable the eco-friendly LED (Light Emitting Diode) feature,
which turns off power to the port LEDs.
Use the no variant of this command to disable the eco-friendly LED feature.
Syntax ecofriendly led
no ecofriendly led
Default The eco-friendly LED feature is disabled by default.
Mode Global Configuration
Usage notes While the eco-friendly LED feature is enabled, a port's LED will not change if the
port's status changes. Instead, the LED will stay turned off. When you disable the
eco-friendly feature again, that will restore power to the port LEDs. The LEDs will
correctly show the current state of the ports, even if that state changed while the
LEDs were off.
For an example of how to configure a trigger to turn off power to port LEDs, see the
Triggers Feature Overview and Configuration
Examples To enable the eco-friendly LED feature which turns off power to all port LEDs, use
the following commands:
awplus#
awplus(config)#
To disable the eco-friendly LED feature, use the following commands:
awplus#
awplus(config)#
Related ecofriendly lpi
commands
show ecofriendly
C613-50631-01 Rev A
C
ONITORING OMMANDS
configure terminal
ecofriendly led
configure terminal
no ecofriendly led
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Guide.
274