Allied Telesis IE340 Series Command Reference Manual page 668

VLAN C
OMMANDS
-
SWITCHPORT MODE PRIVATE VLAN UFO
Example To configure a private VLAN UFO trunk port as primary-upstream, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
primary-upstream
To change the role of the private VLAN UFO 802.1q member port back to the
default of downstream, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related private-vlan
commands
show vlan private-vlan ufo
Command Version 5.4.7-2.1: command added
changes
Version 5.4.8-2.1: added to SBx8100 Series products
Version 5.4.9-0.1: added to x530 Series products
C613-50631-01 Rev A
configure terminal
interface port1.0.2
switchport mode trunk
switchport trunk allowed vlan add 100
switchport mode private-vlan ufo 100
configure terminal
interface port1.0.2
no switchport mode private-vlan ufo 100
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
668