Ipv6 Icmp Error-Interval - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ICMP ERROR INTERVAL

ipv6 icmp error-interval

Overview Use this command to limit how often IPv6 ICMP error messages are sent. The
maximum frequency of messages is specified in milliseconds.
Use the no variant of this command to reset the frequency to the default
Syntax ipv6 icmp error-interval <interval>
no ipv6 icmp error-interval
Default 1000
Mode Global Configuration
Example To configure the rate to be at most one packet every 10 seconds, use the
commands:
awplus#
awplus(config)#
To reset the rate to the default of one packet every second, use the commands:
awplus#
awplus(config)#
Related ip icmp error-interval
commands
C613-50631-01 Rev A
Parameter Description
<interval>
0-2147483647, interval in milliseconds.
configure terminal
ipv6 icmp error-interval 10000
configure terminal
no ipv6 icmp error-interval
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
964