Ipv6 Nd Retransmission-Time - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6 -
IPV ND RETRANSMISSION TIME

ipv6 nd retransmission-time

Overview Use this command to specify the advertised retransmission interval for Neighbor
Solicitation in milliseconds between IPv6 Routers.
Use the no variant of this command to reset the retransmission time to the default
(1 second).
Syntax ipv6 nd retransmission-time <milliseconds>
no ipv6 nd retransmission-time
Default 1000 milliseconds (1 second)
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Examples To set the retransmission-time of Neighbor Solicitation on the VLAN interface
vlan2 to be 800000 milliseconds, enter the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset the retransmission-time of Neighbor Solicitation on the VLAN interface
vlan2 to the default 1000 milliseconds (1 second), enter the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd suppress-ra
commands
ipv6 nd prefix
C613-50631-01 Rev A
Parameter Description
<milliseconds>
Time period in milliseconds. Valid values are from 1000 to
3600000.
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ipv6 nd retransmission-time 800000
no ipv6 nd retransmission-time
981