Show Reboot History - Allied Telesis IE340 Series Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW REBOOT HISTORY

show reboot history
Overview Use this command to display the device's reboot history.
show reboot history
Syntax
Mode User Exec and Privileged Exec
Example To show the reboot history, use the command:
awplus#
Output Figure 7-16: Example output from the show reboot history command
awplus#show reboot history

<date> <time>
-----------------------------------------------
2016-10-10 01:42:04
2016-10-10 01:35:31
2016-10-10 01:16:25
failure!
2016-10-10 01:11:04
failure!
2016-10-09 19:56:16
2016-10-09 19:51:20
Table 6: Parameters in the output from the show reboot history command
Related show continuous-reboot-prevention
commands
show tech-support
C613-50631-01 Rev A
C
ONITORING OMMANDS
show reboot history
<type> <description>
Expected User Request
Expected User Request
Rebooting due to critical process (network/nsm) 
Unexpected
Rebooting due to critical process (network/nsm) 
Unexpected
Expected User Request
Expected User Request
Parameter
Unexpected
Expected
Continuous reboot
prevention
User request
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
A non-intended reboot.
The reboot is counted by the continuous reboot
prevention feature, as long as the reboot occurred in the
time period specified for continuous reboot prevention.
A planned or user-triggered reboot.
The reboot is not counted by the continuous reboot
prevention feature.
A continuous reboot prevention event has occurred. The
action taken is configured with the continuous-reboot-
prevention command. The next time period during which
reboot events are counted begins from this event.
User initiated reboot via the CLI.
311