Show Spanning-Tree Statistics Interface - Allied Telesis IE340 Series Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INTERFACE

show spanning-tree statistics interface

Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
switch port, and all MST instances associated with that switch port.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show spanning-tree statistics interface <port>
Mode Privileged Exec
Example To display BPDU statistics about each MST instance for port1.0.2, use the
command:
awplus#
Output Figure 17-15: Example output from show spanning-tree statistics interface
awplus#show spanning-tree statistics interface port1.0.2

Port number = 906 Interface = port1.0.2
================================
% BPDU Related Parameters
% -----------------------
% Port Spanning Tree
% Spanning Tree Type
% Current Port State
% Port ID
% Port Number
% Path Cost
% Message Age
% Designated Root
% Designated Cost
% Designated Bridge
% Designated Port Id
% Top Change Ack
% Config Pending
C613-50631-01 Rev A
Parameter Description
<port>
The port to display information about. The port may be a switch port
(e.g. port1.0.2), a static channel group (e.g. sa2), or a dynamic (LACP)
channel group (e.g. po2).
show spanning-tree statistics interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
: Disable
: Multiple Spanning Tree Protocol
: Discarding
: 838a
: 38a
: 20000000
: 0
: ec:cd:6d:20:c0:ed
: 0
: ec:cd:6d:20:c0:ed
: 838a
: FALSE
: FALSE
"Getting Started
Guide.
728