Ipv6 Address Suffix - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6
IPV ADDRESS SUFFIX

ipv6 address suffix

Overview Use this command to configure the suffix to use when generating an address from
prefix information. Any addresses that were created with the EUI-64 suffix will be
removed, and new addresses will be added after the next Router Advertisement.
Use the no variant of this command to set it back to the default of disabled or set
to :: for the same result as the no variant.
ipv6 address suffix <ipv6-addr-suffix>
Syntax
no ipv6 address suffix
Default Disabled
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To configure the suffix to use when generating an address from prefix information
on vlan2, use the command:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd accept-ra-pinfo
commands
show running-config interface
Command Version 5.4.8-2.1: command added
changes
C613-50631-01 Rev A
Parameter
<ipv6-addr-suffix>
configure terminal
interface vlan2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
In the format of ::X:X:X:X, for example ::a2d8:0fd8
ipv6 address suffix ::a2d8:0fd8
959