Ip Dns Forwarding - Allied Telesis IE340 Series Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE

IP DNS FORWARDING

ip dns forwarding
Overview Use this command to enable DNS Relay, the forwarding of incoming DNS queries
for IP hostname-to-address translation.
Use the no variant of this command to disable the forwarding of incoming DNS
queries for IP hostname-to-address translation.
Syntax ip dns forwarding
no ip dns forwarding
Default The forwarding of incoming DNS query packets is disabled by default.
Mode Global Configuration
Usage notes DNS Relay is independent of the configuration of
enabled by default). If
router will continue to forward DNS queries by hosts in the network to its
configured name-servers.
See the
Examples To enable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
To disable the forwarding of incoming DNS query packets, use the commands:
awplus#
awplus(config)#
Related clear ip dns forwarding cache
commands
debug ip dns forwarding
ip dns forwarding cache
ip dns forwarding dead-time
ip dns forwarding retry
ip dns forwarding source-interface
ip dns forwarding timeout
ip domain-lookup
ip name-server
show ip dns forwarding
show ip dns forwarding cache
show ip dns forwarding server
C613-50631-01 Rev A
OMMANDS
ip domain-lookup
ip dns forwarding dead-time
configure terminal
ip dns forwarding
configure terminal
no ip dns forwarding
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ip domain-lookup
is disabled, but DNS Relay is enabled, the
command used with this command.
(which is
931