Allied Telesis IE340 Series Command Reference Manual page 787

L A C
INK GGREGATION OMMANDS
-
CHANNEL GROUP
Examples To add device port1.0.2 to a newly created LACP channel group 2, in active mode,
use the commands below:
awplus#
awplus(config)#
awplus(config-if)#
To remove device port1.0.2 from any created LACP channel groups, use the
command below:
awplus#
awplus(config)#
awplus(config-if)#
To reference channel group 2 as an interface, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show etherchannel
commands
show etherchannel detail
show etherchannel summary
show port etherchannel
Command Version 5.4.9-0.1: Ability added to create up to 128 groups as any combination of
changes static and dynamic channel groups. Also, numbering changed to 1-248.
C613-50631-01 Rev A
configure terminal
interface port1.0.2
channel-group 2 mode active
configure terminal
interface port1.0.2
no channel-group
configure terminal
interface po2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
787