Allied Telesis IE340 Series Command Reference Manual page 397

C F M
ONNECTIVITY AULT ANAGEMENT
SHOW ETHERNET CFM MAINTENANCE
Table 9-6: Parameters in the output from show ethernet cfm
Related ethernet cfm domain-name
commands
mep crosscheck
service ma-name
show ethernet cfm details
Command Version 5.4.7-1.1: command added
changes
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
C613-50631-01 Rev A
C
OMMANDS
-
POINTS REMOTE MEP
maintenance-points remote mep
Parameter
CFM Domain Name
and CFM Service
Name
Remote MEPID
Receiving CCMs
RX RDI
MAC Address
Port Status
Interface Status
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The instance identifiers that uniquely identify the MA and
MD for the remote MEP(s) of interest.
The remote MEP ID that is configured for this MA.
The current state of the 802.1ag remote MEP state
machine:
Yes - RMEP_OK. CCMs are being received without any
error.
Wait - RMEP_START. Still preparing to receive remote MEP
CCMs without a timeout occurring.
Failed - RMEP_FAILED. While waiting to receive CCMs from
a remote MEP, a timeout occurred.
- - the state machine is not running.
The current RDI being received from this remote MEP:
True - the last CCM received from the remote MEP has the
RDI set. This means the remote MEP itself is seeing one of
the following defects: someRMEPCCMDefect,
someMACstatusDefect, errorCCMdefect, xconCCMdefect.
False - the last CCM received from the remote MEP does
not have its RDI set.
The configured or discovered MAC address of the remote
MEP.
If the CCM was received with a port status TLV, this
indicates the last value received, or "-" if none received.
If the CCM was received with an interface status TLV, this
indicates the last value received, or "-" if none received.
397