Key - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS

KEY

key
Overview Use this command to manage, add and delete authentication keys in a key-chain.
Use the no variant of this command to delete the authentication key.
Syntax key <keyid>
no key <keyid>
Mode Keychain Configuration
Usage This command allows you to enter the keychain-key mode where a password can
be set for the key.
The following example configures a key number 1 and shows the change into a
Example
keychain- key command mode prompt.
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
Related key chain
commands
key-string
accept-lifetime
send-lifetime
C613-50631-01 Rev A
Parameter Description
<keyid> <0-2147483647> Key identifier number.
configure terminal
key chain mychain
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
key 1
1048