Allied Telesis IE340 Series Command Reference Manual page 421

L C
OGGING OMMANDS
( )
LOG BUFFERED FILTER
Default By default the buffered log has a filter to select messages whose severity level is
"notices (5)" or higher. This filter may be removed using the no variant of this
command.
Mode Global Configuration
Examples To add a filter to send all messages generated by EPSR that have a severity of
notices or higher to the buffered log, use the following commands:
awplus#
awplus(config)#
To add a filter to send all messages containing the text "Bridging initialization" to
the buffered log, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to the buffered log, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages containing the text "Bridging
initialization" to the buffered log, use the following commands:
awplus#
awplus(config)#
Related clear log buffered
commands
default log buffered
log buffered
log buffered size
log buffered exclude
show log
show log config
C613-50631-01 Rev A
configure terminal
log buffered level notices program epsr
configure terminal
log buffered msgtext Bridging initialization
configure terminal
no log buffered level notices program epsr
configure terminal
no log buffered msgtext Bridging initialization
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
421