Allied Telesis IE340 Series Command Reference Manual page 212

U A C
SER CCESS OMMANDS
(
FLOWCONTROL HARDWARE ASYN
Examples To enable hardware flow control on terminal console line asyn0, use the
commands:
awplus#
awplus(config)#
awplus(config-line)#
To disable hardware flow control on terminal console line asyn0, use the
commands:
awplus#
awplus(config)#
awplus(config-line)#
Related clear line console
commands
show running-config
speed (asyn)
C613-50631-01 Rev A
/ )
CONSOLE
configure terminal
line console 0
configure terminal
line console 0
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
flowcontrol hardware
no flowcontrol hardware
212