Allied Telesis IE340 Series Command Reference Manual page 207

U A C
SER CCESS OMMANDS
ENABLE PASSWORD
Usage notes This command enables the Network Administrator to set a password for entering
the Privileged Exec mode when using the
command.
You can use this command to give a user an intermediate CLI security level
(privilege level 7). Such users can access all the show commands in Privileged Exec
mode and all the commands in User Exec mode, but not any configuration
commands in Privileged Exec mode.
The device stores passwords in hashed form in configuration files, unless you
disable
Related enable (Privileged Exec mode)
commands
enable secret (deprecated)
service password-encryption
privilege level
show privilege
username
show running-config
C613-50631-01 Rev A
service password-encryption.
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
enable (Privileged Exec mode)
207