Show System Environment - Allied Telesis IE340 Series Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM ENVIRONMENT

show system environment
Overview This command displays the current environmental status of your device and its
power supplies and any other expansion options. The environmental status covers
information about temperatures, fans, and voltage.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show system environment
Syntax
Mode User Exec and Privileged Exec
Example To display the system's environmental status, use the command:
awplus#
Output Figure 7-20: Example output from show system environment
awplus#show sys environment
Environment Monitoring Status

Overall Status: Normal

Resource ID: 1 Name: IE340-20GP
ID Sensor (Units)
1 Temp: System (Degrees C)
2 Voltage: Input 1 (Volts)
3 Voltage: Input 2 (Volts)
4 Almmon: LED Output
5 Contact Input 1
6 Almmon: Relay Output 1
7 Power Input 1
8 Power Input 2
If PoE is disabled on a PoE-capable switch, the voltage low limit changes to 18V.
Related show system
commands
show system environment counters
trigger
type env-sensor
C613-50631-01 Rev A
C
ONITORING OMMANDS
show system environment
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Reading Low Limit High Limit Status
29 85(Hyst)
53.686 46.000
53.686 46.000
No -
Open -
Closed -
No -
No -
"Getting Started
Guide.
90 Ok
57.000 Ok
57.000 Ok
- Ok
- Ok
- Ok
- Ok
- Ok
315