Tim15 Main Features - ST STM32F100 Series Reference Manual

RM0041
15.2

TIM15 main features

TIM15 includes the following features:
•
16-bit auto-reload upcounter
• 16-bit programmable prescaler used to divid (also "on the fly") the counter clock
frequency by any factor between 1 and 65536
•
Up to 2 independent channels for:
–
–
–
–
•
Complementary outputs with programmable dead-time (for channel 1 only)
•
Synchronization circuit to control the timer with external signals and to interconnect
several timers together
•
Repetition counter to update the timer registers only after a given number of cycles of
the counter
• Break input to put the timer's output signals in the reset state or a known state
•
Interrupt/DMA generation on the following events:
–
–
–
–
–
Input capture
Output compare
PWM generation (edge mode)
One-pulse mode output
Update: counter overflow, counter initialization (by software or internal/external
trigger)
Trigger event (counter start, stop, initialization or count by internal/external trigger)
Input capture
Output compare
Break input (interrupt request)
General-purpose timers (TIM15/16/17)
RM0041 Rev 6 389/709
455