Menu: Fault/Alarm Memory - Siemens SINAMICS DCM Operating Instructions Manual

Operation
9.3 Controlling via the AOP30 operator panel
9.3.4

Menu: Fault/alarm memory

When you select this menu, a screen appears containing an overview of faults and alarms
that are present.
For each drive object, the system indicates whether any faults or alarms are present ("Fault"
or "Alarm" appears next to the drive object in question).
In the graphic below, you can see that at least one active fault/alarm is present for the
"DC_CTRL" drive object. No faults or alarms are indicated for the other drive two objects.
320
Overview of faults/alarms
When you navigate to the line with active
alarms/faults and then press the F5 (<Diag>)
key, the system displays a screen in which
you may select the current or old
alarms/faults.
Displaying diagnostics
When you navigate to the required line and
then press the F5 (<OK>) key, the
corresponding faults/alarms are displayed.
The list of current faults is selected here as an
example.
Display of current faults
A maximum of eight current faults are
displayed along with their fault number and
name.
To display additional help regarding the cause
of the problem and how to solve it, choose F1
(<Help>).
To acknowledge the faults, choose F5
(<Ack.>). If a fault cannot be acknowledged,
the fault remains.
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter