Fault And Alarm Messages - Siemens SINAMICS S120 Commissioning Manual

Diagnostics

6.3 Fault and alarm messages

6.3 Fault and alarm messages
Overview
The errors and states detected by the individual components of the drive system are indicated
by messages. The messages are categorized into faults and alarms.
Note
The individual faults and alarms are described in Chapter "Faults and alarms" in the SINAMICS
S120/S150 List Manual. Function diagrams for the fault buffer, alarm buffer, fault trigger and
fault configuration are also contained in the Section "Function diagrams" - "Faults and alarms".
Note
Additional support for faults and alarms
The Startdrive information system allows you to call additional help for every displayed message
via the question mark icon in the inspector window on the "Diagnostics" tab (see section "Help
for messages and diagnostics").
332
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2