34.6 Device Range that Can Be Set
For details on the device range of controllers that can be used on GT14 Handy, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual(Fundamentals)
GOT1000 Series Connection Manual (Non-Mitsubishi Products 1) for GT Works3
34.7 Precautions
Station number setting of the temperature controller system
Make sure to establish temperature controller system with No.1 station.
GOT clock control
Since the temperature controller does not have a clock function, the settings of [time adjusting] or [Broadcast] by
GOT clock control will be disabled.
Cutting the portion of multiple connection of the controller
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of the setting contents of GOT internal device, refer to the following manual.
GT Designer3 Version1 Screen Design Manual
34. CONNECTION TO OMRON TEMPERATURE CONTROLLER
34.6 Device Range that Can Be Set
32
33
34
35
36
37
38
39
34 - 13