Accessing By The Mt Developer - Mitsubishi Electric GT14 User Manual

31.6.7 Accessing by the MT
Developer
This section explains the procedure to set the FA
transparent function of MT Developer with an example of
connecting to motion controller CPU (Q series).
1.
Click [Communication]
MT Developer.
2.
Check-mark the following in [Serial port].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
3.
Click [Detail].
[Communication Setting] in
4.
Check-mark the following in [PLC side I/F Detailed
setting of PLC module].
Direct CPU connection
[via GOT (direct coupled) transparent mode]
5.
As necessary, select a CPU that is targeted by using
the transparent function in [CPU].
6.
Click .
7.
Confirm that the PC is connected to the motion
controller CPU (Q series).
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 39