Mitsubishi Electric GT14 User Manual page 458

The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*3 For the system configuration of the Ethernet module, refer to the following manuals.
*4 Select one of the following [Type] in [Ethernet setting] of GT Designer3.
• Ethernet module (FX Series): FX
For [Ethernet] of GT Designer3, refer to the following.
*5 When using an Ethernet module with the FX3UC series, FX
*6 When using an Ethernet module with the FX
*7 FX
communication adapter CH (Max. 1 CH) of the FX
*8 Use C or later version of GT11H-C-37P.
23 - 8
23. ETHERNET CONNECTION
23.2 System Configuration
For FX Ethernet Interface Module User's Manual
23.3.3 Ethernet setting
-ENET-ADP occupies one extension communication adapter CH (Max. 2 CHs) of the FX
3U
-1PS-5V or FX
3UC
series, FX -CNV-BD, FX -422-BD, or FX
3U 3U 3U
. One CPU allows the connection of only one FX
3S
-CNV-IF is required.
2NC
-232-BD is required.
3U
or FX and one extension
3U(C) 3G(C)
-ENET-ADP.
3U