Ethernet Connection - Mitsubishi Electric GT14 User Manual

35.3 Ethernet Connection

35.3.1 System configuration for connecting to KV-700/1000/3000/5000/5500
Ethernet
CPU
module
PLC
Connection cable
Ethernet
Series Cable model
*3
module
Twisted pair cable
KV-5000 -
• 10BASE-T
Shielded twisted pair cable (STP)
or unshielded twisted pair cable in
category (UTP): 3, 4 and 5
KV-700
• 100BASE-TX
KV-1000
Shielded twisted pair cable (STP):
KV-LE20V
KV-3000
Category 5 and 5e
KV-LE21V
KV-5000
KV-5500
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*2 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*3 Product manufactured by KEYENCE CORPORATION. For details of the product, contact KEYENCE CORPORATION.
*4 Use C or later version of GT11H-C-37P.
Connector
conversion
box
Connection cable
*1
Connector
External cable
conversion box
GT14H-C30-42P (3m)
GT16H-CNB-42S GT14H-C60-42P (6m)
GT14H-C100-42P (10m)
GT11H-C30-37P (3m)
GT16H-CNB-37S GT11H-C60-37P (6m)
GT11H-C100-37P (10m)
GT14H-C30-42P (3m)
GT16H-CNB-42S GT14H-C60-42P (6m)
GT14H-C100-42P (10m)
GT11H-C30-37P (3m)
GT16H-CNB-37S GT11H-C60-37P (6m)
GT11H-C100-37P (10m)
External cable
Maximum
GOT
*4
segment
model
length
100m
*2
35. CONNECTION TO KEYENCE PLC
35.3 Ethernet Connection
Communication driver
MODBUS/RTU
GOT
Number of connectable
equipment
When PLC:GOT is N:1
The following shows the
number of PLCs for 1 GOT
TCP: 128 or less
UDP: 128 or less
When PLC:GOT is 1:N
The following shows the
number of GOTs for 1 PLC
TCP: 15 or less
UDP: 1 or less
35 - 19
32
33
34
35
36
37
38
39