Accessing By Gx Works2 - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

7.
The screen returns to the [Transfer Setup]. Click the
to check if GX Developer has been
connected to the FXCPU.
POINT
POINT
POINT
How to operate GX Developer
For the GX Developer operation method, refer to the
following manual.
GX Developer Version Operating Manual

31.6.4 Accessing by GX Works2

The following shows the procedure to set the FA
transparent function of GX Works2.
When connecting the GOT and PC with USB
(1) Connecting the GOT and PLC in direct CPU
connection
(a) Connecting to QCPU (Q mode)
1.
Click the Connection Destination view
Destination]
[(Connection target data name)] in the
Navigation window of GX Works2.
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PC side I/F: Serial USB
PLC side I/F: GOT
Other station: No specification
4.
Double-click [Serial] of the PC side I/F to display [PC
side I/F Serial setting].
5.
Check the following for [PC side I/F Serial Setting].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
[Connection
29
30
31
31 - 29

Advertisement

Table of Contents
loading

Table of Contents