Mitsubishi Electric GT14 User Manual page 1137

0021 INC
0022
Dest DW00025
NL-2
0022
STORE
0023
Source DW00000
NL-2
Dest DW00026
STORE
0023
0024
Source DW00001
NL-2
Dest DW00027
STORE
0024
0025
Source DW00002
NL-2
Dest DW00028
0025 STORE
0026
Source DW00004
NL-2
Dest DW00029
0026 STORE
0027
Source DW00005
NL-2
Dest DW00030
STORE
0027
0028
Source DW00006
NL-2
Dest DW00031
0028 STORE
0029
Source DW00007
NL-2
Dest DW00032
0029 END_IF
0030
NL-1
0030
0031
NL-1
*1 When connecting to multiple GOTs, set connection numbers individually for each GOT.
*2 Set 0 to PARAM08 to 11 of MSG_RCV (input relay, input register, coil, holding register offset). (Do not make the offset settings.)
When the offset is needed, set [Option] [Offset] to each object or make a setting added the offset value to the device.
*3 Set the available write range for the holding registers.
*4 When connecting to multiple GOTs, set channel numbers individually for each GOT.
*5 Set the Dev-Typ of the message receive function <MSG-RCV> to [00016] for the built-in MP2300S Ethernet connection or the
Ethernet port connection of 218IF-02.
END
49. CONNECTION TO YASKAWA PLC
Increments the abnormal pass counter
Stores the processing results
Stores the status
Stores the number of station to which
the command is sent
Stores the FC.
Stored the data address.
Stores the data size.
Stores the remote CPU.
49.3 Ethernet Connection
48
49
50
51
52
53
54
55
49 - 29