Controller Side Setting; Connecting To Lt230, Lt300 Series; Connecting To Lt400, Lt830 Series; Connecting To Dz1000, Dz2000 Series - Mitsubishi Electric GT14 User Manual

40.5 Controller Side Setting

POINT POINT POINT
(1) CHINO controller
For details of CHINO controller, refer to the
following manual.
User's Manual of the CHINO controller
(2) Interface converter
For details on communication settings of the
RS232C/RS485 converter, refer to the following
manual.
User's Manual of RS232C/RS485 converter
Model
LT230, LT300
LT400, LT830
DZ1000, DZ2000
DB1000, DB2000
GT120
KP1000, KP2000
Controller
AL3000, AH3000
SE3000
JU
KE3000
LE5100, LE5200,
LE5300
Interface converter SC8-10
40.5.1 Connecting to LT230, LT300
Series

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting to Lock 4.

Communication settings
Set the communication settings with controller key
operation.
Item
Protocol
Function
*1
Station No.
*2
Transmission speed
*2
Character
(Bit length, Parity bit, Stop bit)
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
Refer to
40.5.1
40.5.2
40.5.3
40.5.4
40.5.5
40.5.6
40.5.7
40.5.8
40.5.9
40.5.10
40.5.11
40.5.12
Set value
rtU: MODBUS RTU
Com: Upper communication
1 to 99
9600bps, 19200bps
5: 8bits, None, 1bit
6: 8bits, None, 2bits
7: 8bits, Even, 1bit
8: 8bits, Even, 2bits
9: 8bits, Odd, 1bit
10: 8bits, Odd, 2bits
40. CONNECTION TO CHINO CONTROLLER
40.5.2 Connecting to LT400, LT830
Series

Key Lock setting
To write the Digital and the Analog parameters, set the
following Key Lock setting.
• LT400: Lock4
• LT830: Lock3

Communication settings
Set the communication settings with controller key
operation.
Item
Protocol
Function
*1
Station No.
*2
Transmission speed
*2
Character
(Bit length, Parity bit, Stop bit)
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
40.5.3 Connecting to DZ1000,
DZ2000 Series

Key Lock setting
To write the Digital and the Analog parameters, set the
Key Lock setting to Lock 2.

Communication settings
Set the communication settings with controller key
operation.
Item
Protocol
Function
*1
Station No.
*2
Transmission speed
Data bit
Stop Bit
Parity bit
*1 Avoid duplication of the station No. with any of the other units.
*2 Adjust the settings with GOT settings.
40.5 Controller Side Setting
Set value
rtU: MODBUS RTU
Com: Upper communication
1 to 99
9600bps, 19200bps
8N1: 8bits, None, 1bit
8N2: 8bits, None, 2bits
8E1: 8bits, Even, 1bit
8E2: 8bits, Even, 2bits
8O1: 8bits, Odd, 1bit
8O2: 8bits, Odd, 2bits
Set value
rtU: MODBUS RTU
Com: Upper communication
1 to 31
9600bps, 19200bps
8bits (fixed)
1bit (fixed)
None (fixed)
40 - 17
40
41
42
43
44
45
46
47