Mitsubishi Electric GT14 User Manual page 642

Series
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q02PHCPU
Q06PHCPU
Q12PHCPU
Q25PHCPU
Q12PRHCPU (Main base)
Q25PRHCPU (Main base)
Q12PRHCPU (Extension base)
Q25PRHCPU (Extension base)
Q00UJCPU
Q00UCPU
Q01UCPU
Q02UCPU
MELSEC-Q
(Q mode) Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Q100UDEHCPU
Q03UDVCPU
Q04UDVCPU
Q06UDVCPU
Q13UDVCPU
Q26UDVCPU
Q12DCCPU-V
Q24DHCCPU-V/VG
Q24DHCCPU-LS
C Controller
Q26DHCCPU-LS
module (Q Series)
Q24DHCCPU-V/VG
Q24DHCCPU-LS
Q26DHCCPU-LS
*1
*2
*3
31 - 6
31. FA TRANSPARENT FUNCTION
31.3 List of Models that Can Be Monitored
Model
*3
*3
*3
*3
*3
Setting/Monitoring tool for C
Controller module
Use the serial port of QCPU in the multiple CPU system since QnUDEHCPU, Q12DCCPU-V, and Q24DHCCPU-V/VG have no
direct coupled I/F.
When using Q12DCCPU-V1 or Q24DHCCPU-V/VG as the connected CPU, only MX Component can be used. When accessing
other CPUs relaying Q12DCCPU-V or Q24DHCCPU-V/VG GX Developer or GX Works2 can also be used.
MX Component Version 4.11M or later is required to use the FA transparent function.
MX Sheet, please use the MX Component (Version 4.11M or later).
Target software
Direct CPU connection
GX Developer
GX Works2
GX Configurator
PX Developer
MX Component
MX Sheet
Connection type
Computer link connection
*1
(Continued to next page)
Ethernet connection
*2