Mitsubishi Electric GT14 User Manual page 657

8.
By clicking [Setting], the [GOT (Ethernet) transparent
setting] is displayed.
Here, set the built-in Ethernet port CPU , which is
firstly connected via a GOT.
9.
Specify the IP address for [IP address] same as the
IP address assigned to the built-in Ethernet port CPU.
10.
The screen returns to Specify Connection Destination
Connection1. Click [Connection Test] to check if GX
Works3 has been connected to the FX5UCPU.
(2) Connecting the GOT and PLC in direct CPU
connection(for
FX5U/FX5UC only)
1.
Click [Online] [Specify Connection Destination] on
GX Works3.
2.
The [Specify Connection Destination 1] is displayed.
3.
Set the [Specify Connection Destination 1]:
PC side I/F
PLC side I/F
Other Station Setting
4.
Double-click [Serial USB] of the PC side I/F to display
[PC side I/F Serial Setting].
5.
Check-mark either of the following in [PC side I/F
Serial Setting].
When connecting the GOT and PC with serial
Mark the [RS-232C] checkbox.
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
: Serial USB
: GOT
: No Specification:
31 - 21
25
26
27
28
29
30
31