Mitsubishi Electric GT14 User Manual page 1089

*1 Click the [Setting] button and perform the setting in the [GOT
IP Address Setting] screen.
*2 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
■ Ethernet setting

Ethernet setting
Item Description
The host is displayed. (The host is
Host
indicated with an asterisk (*).)
Set the network No. of the connected
N/W No. Ethernet module.
(Default: 1)
Set the station No. of the connected
*2
the PLC.
PC No.
(Default: 1)
Type FUJI (fixed)
Set the IP address of the connected
*1
the PLC.
IP address
(Default: 192.168.0.1)
Set the port No. of the connected the
*3
PLC.
Port No.
(Default: 507)
Communication
TCP (fixed)
format
*1 Connection with the PLC is unavailable if the IP address is
the default value. Set the value to the IP address of the PLC
to be connected.
*2 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
■ Communication detail settings
*3 Make sure that the port No. is equivalent to "Self port
reference No. in the PLC + 251".
■ Setting the IP address and self port reference No.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
47. CONNECTION TO FUJI PLC
47.3 Ethernet Connection
40
41
Set value
―
42
1 to 239
1 to 254
FUJI (fixed)
43
PLC side IP
address
251 to 65531
TCP (fixed)
44
45
46
47
47 - 37