When designing a system, always read the relevant manuals and give due consideration to safety.
In addition, pay careful attention to the following points for proper handling during training.
[Precautions during training]
● To prevent electric shock, do not touch the terminal block while the power is supplied.
● When opening the safety cover, turn off the power, or make sure that it is sufficiently safe.
● Follow the instructor's directions during training.
● Do not remove training machine units or change wiring without permission.
Doing so could cause a breakdown, faulty operation, injury, or fire.
● Turn the power OFF before mounting or removing a unit.
Doing so while the current is ON could cause a breakdown or electric shock.
● If the training machine emits a strange odour or sound, press the "Power Switch" or the "Emergency
Switch" to stop the machine.
● If any trouble occurs, contact the instructor right away.
SAFETY PRECAUTIONS
(Make sure to read before training)
Danger
Caution
A - 1