Connecting To Z-Tio, Z-Dio, Z-Ct - Mitsubishi Electric GT14 User Manual


Unit address settings
Set the unit address using the unit address setting
switch.
53 - 40
53. CONNECTION TO RKC TEMPERATURE CONTROLLER
53.5 Temperature Controller Side Setting
Unit address setting switch
Setting range: 0 to F
53.5.3 Connecting to Z-TIO, Z-DIO,
Z-CT

Communication settings
Make the communication settings of the temperature
controller.
Item
*1
9600bps, 19200bps, 38400bps
Communication speed
Communication protocol MODBUS
Data bit: 8bits, Parity: None
Data bit: 8bits, Parity: Even
Data bit configuration
Data bit: 8bits, Parity: Odd
Stop bit: 1bit (fixed)
*2
0 to F
Unit address
Interval time 0 to 250ms
*1 Adjust the settings with GOT settings.
*2 Select the module address without overlapping with that of
other units.

Setting DIP switches
Make the settings of transmission speed, data bit
configuration, communication protocol
Front side
Setting item Set value
9600bps
Communication
19200bps
speed
38400bps
Data bit: 8bits,
Parity: None
Data bit Data bit: 8bits,
configuration Parity: Even
Data bit: 8bits,
Parity: Odd
Communication
MODBUS
protocol
Setting range
D i p s w i t c h
O F F
Right side
Switch No.
1 2 3 4 5
ON OFF
OFF ON
ON ON
OFF OFF ON
OFF ON ON
ON ON ON
O N
6
ON