18.1.1 Setting connected equipment (Channel setting)
Set the channel of the equipment connected to the GOT.
Setting
1.
Select [Common]
2.
The Controller Setting dialog box appears. Select the channel No. to be used from the list menu.
3.
Refer to the following explanations for the setting.
POINT
POINT
POINT
Channel No.2
Use the channel No.2 when using the Multi-channel function.
For details of the Multi-channel function, refer to the following.
18 - 2
18. DRAWING SOFTWARE SETTINGS (CONTROLLER SETTING AND COMMON SETTINGS)
18.1 Setting the Communication Interface
[Controller Setting] from the menu.
30. MULTI-CHANNEL FUNCTION