Mitsubishi Electric GT14 User Manual page 416


Connection to MELSEC iQ-F Series
POINT POINT POINT
MELSEC iQ-F Series communication settings
For details of MELSEC iQ-F Series communication
settings, refer to the following manual.
MELSEC iQ-F Series User's Manual
Module parameter settings as a default value (MELSOFT
Connection).
If it sets up other than a default value, it becomes
impossible to communicate with GOT.
(1) Module parameter setting
(When using FX5-485-BD)
POINT POINT POINT
When changing the module parameter
After writing module parameters to the PLC CPU, turn
the PLC CPU OFF then back ON again, or reset the
PLC CPU.
21 - 34
21. DIRECT CONNECTION TO CPU
21.6 Precautions