Download  Print this page

Wiring Precautions The Part Which Matches The Emc Directives - Mitsubishi Electric A960GOT User Manual

Human machine interface, graphical operator terminal.
Hide thumbs

Advertisement

6 HANDLING

6.1.4 Wiring precautions the part which matches the EMC Directives

For Bus connection
GOT terminal block
INPUT
100-240VAC
AC
6 - 6
Connect and wire GOT-A900 series equipment as instructed below.
If the GOT-A900 series equipment is configured in a way that differs from the following
instructions then the system will not comply with EMC directives.
(1) Method to connect the power wire, ground wire and protective
ground terminal
a) Connect the power wire and connection cable as shown in the illustration, and
be sure to attach a ferrite core (TDK type ZCAT3035-1330) within the range
shown below.
Lead the power wire and ground wire as shown in Section 1.1.2 (2).
Always ground the LG and FG wires.
For A985GOT
For RS-422 connection
GOT terminal block
(LG)
(FG)
Ferrite
core
LG
FG
INPUT
100-240VAC
(LG)
(FG)
Ferrite
core
1
AC
LG
FG
1: Wrap the FG and LG wire around the ferrite core.
MELSEC-GOT
A97 /960GOT
GOT terminal block
INPUT
100-240VAC
(LG)
(FG)
Ferrite
core
AC
LG
FG
1
6 - 6

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric A960GOT

This manual is also suitable for:

A970gotA975gotA985got

Comments to this Manuals

Symbols: 0
Latest comments: