43.6 Device Range that Can Be Set
For details on the device range of controllers that can be used on GT14 Handy, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GOT1000 Series Connection Manual (Non-Mitsubishi Products 1) for GT Works3
43.7 Precautions
Station number setting in the servo system
Configure the servo system so that there is a servo amplifier with a station number set with a host address.
For details of host address setting, refer to the following.
43.4.2 Communication detail settings
Monitor speed
When monitoring multiple station devices placed on the same GOT screen, the monitor speed is slow.
Even when monitoring a single station, the monitor speed is slow if the number of device points is large.
Combination use of MINAS A4 series and MINAS A5 series
MINAS A4 series and MINAS A5 series cannot be used together. The multiple MINAS A4 series can be used
together.
43. CONNECTION TO PANASONIC SERVO AMPLIFIER
43.6 Device Range that Can Be Set
40
41
42
43
44
45
46
47
43 - 7