Accessing Plc By Fx Configurator-Fp - Mitsubishi Electric GT14 User Manual

Hide thumbs Also See for GT14:
Table of Contents

Advertisement

31.6.12 Accessing PLC by FX
Configurator-FP
This section explains the procedure to set the FA
transparent function of FX Configurator-FP with an
example of connecting to FXCPU.
1.
Click [Connection setup] for [Online] on FX
Configurator-FP.
2.
Check-mark the following in [PC side].
When connecting the GOT and PC with USB
Mark the [USB (GOT transparent mode)] checkbox.
3.
Click [Comm. Test].
4.
The communication test is executed. Check that the
GOT is correctly connected to the FXCPU.
31 - 42
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
31.6.13 Accessing by FX
Configuration tool
This section explains the procedure to set the FA
transparent function of the FX
tool.
1.
Click [Transfer setup] on the FX
Configuration tool.
2.
Mark the [Serial port/USB] checkbox in [Connecting
interface].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
3.
Click [Comm. Test].
4.
The communication test is executed. Check that the
GOT is correctly connected to the FXCPU.
-ENET-L
3U
-ENET-L Configuration
3U
-ENET-L
3U

Advertisement

Table of Contents
loading

Table of Contents