Accessing By The Cpu Module Logging Configuration Tool - Mitsubishi Electric GT14 User Manual

31.6.17 Accessing by the CPU Module
Logging Configuration Tool
The following shows the procedure to set the FA
transparent function of the QnUDVCPU•LCPU Logging
Configuration Tool.
1.
Click [Online] [Transfer Setup...].
2.
The [Transfer Setup] dialog box is displayed.
3.
Set the [Transfer Setup]:
PC side I/F: Serial USB
PLC side I/F: GOT
Other Station Setting: (Select from the system
configuration)
4.
Set [PC side I/F Serial Setting] and [PLC side I/F
Detailed Setting of GOT] in [Transfer Setup].
For details, refer to the following.
31.6.4 Accessing by GX Works2
31 - 46
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
31.6.18 Accessing by Setting/
Monitoring tool for C Controller
module
The following shows the procedure to set the FA
transparent function of Setting/Monitoring tool for C
Controller module (Q Series) with the C Controller module
(Q24DHCCPU-V) connected.

When connecting the GOT and personal
computer with USB
(1) When connecting the GOT and PLC in Ethernet
communication
1.
Click [Transfer setup]
2.
The [Transfer Setup] is displayed.
3.
Set the [Transfer Setup]:
PLC side I/F: GOT
Other station: No specification
[Online].