Accessing The Servo Amplifier By The Mr Configurator - Mitsubishi Electric GT14 User Manual

31.6.9 Accessing the servo amplifier
by the MR Configurator
Make the FA transparent settings in the communication
setting of MT Developer.
For details of MT Developer, refer to the following.
31.6.7 Accessing by the MT Developer
31.6.10 Accessing the servo amplifier
by the MR Configurator2
Make the FA transparent settings in the MT Works2
communication settings.
For details of MT Works2, refer to the following.
31.6.8 Accessing by MT Works2
31.6.11 Accessing the inverter by the
FR Configurator
This section explains the setting method of the FA
transparent function of FR Configurator with an example of
connecting to FREQROL A700/F700 series.
1.
Click [Settings] [Communication Settings...] in FR
Configurator.
2.
Check-mark the following in [Communication port].
When connecting the GOT and PC with USB
Mark the [USB] checkbox.
3.
Check-mark the [GOT Transparent Communication].
4.
Click the [OK].
5.
Click [OFFLINE] to make it [ONLINE].
6.
Click the [System Read], and then check if GOT has
been connected to FREQROL A700/F700 series
normally.
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 41