Accessing By Gx Logviewer - Mitsubishi Electric GT14 User Manual

6.
Double-click [GOT] of the PLC side I/F to display
[PLC side I/F Detailed Setting of GOT].
7.
Set the IP address and port No. in [Ethernet detail
setting for PC and GOT connection].
Set the IP address and port No. to the same as the
one in the Ethernet download setting.
31.5.1 Setting communication interface
8.
Check-mark [C24] in [PLC side I/F Detailed Setting of
GOT].
9.
The screen returns to [Transfer Setup]. Click
to check if GX Developer has been connected to the
QCPU (Q mode).
31.6.5

Accessing by GX LogViewer

The following shows the procedure to set the FA
transparent function of GX LogViewer.
1.
Click [Show Assistant Dialog] for [View] on GX
LogViewer.
2.
The [Assistant] dialog box is displayed.
3.
Click [LCPU] [Show Logged Device Status] in the
[Assistant] dialog box.
4.
The [Transfer Setup] dialog box is displayed.
5.
Set the [Transfer Setup]:
PC side I/F: Serial USB
PLC side I/F: GOT
Other Station Setting: (Select from the system
configuration)
6.
For [PC side I/F Serial Setting] and [PLC side I/F
Detailed Setting of GOT] of [Transfer Setup], refer to
the following.
31.6.4 Accessing by GX Works2
31. FA TRANSPARENT FUNCTION
31.6 Personal Computer Side Setting
25
26
27
28
29
30
31
31 - 37