Mitsubishi Electric GT14 User Manual page 1079

(2) Precautions when preparing a cable
(a) Cable length
The total distance (between GOT and controllers)
of RS-485 cable must be 13m or less.
(b) Connector conversion box side connector
For the connector conversion box side connector,
refer to the following.
6.6 Connector Conversion Box
(c) External cable side connector
For the connector specifications of the external
cable side, refer to the following.
8.2 External Cable, Relay Cable
(d) FUJI PLC side connector
Use the connector compatible with the FUJI PLC
side module.
For details, refer to the FUJI PLC user's manual.
(3) Connecting terminating resistors
(a) FUJI PLC side
When connecting a FUJI PLC to the GOT, a
terminating resistor must be connected.
47.2.7 PLC Side Setting
47. CONNECTION TO FUJI PLC
47.2 Serial Connection
40
41
42
43
44
45
46
47
47 - 27